New Silu UPS Uninterruptible Power Supply 2kVA Online Built-in Battery Mh12V7ah * 4 Sine Wave 2000va/1600W, 48V, UPS Power Supply, Server Computer Room

• Phase: Single Phase
• Type: On-line
• Protection: Sealed Maintenance Free
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CYE2K
• Application: Industry
• Classification: Lighting
• Standby Time: Long-acting Machine
• Standby UPS: Sine Wave Output UPS
• Output Capacity: Small Type
• Equipment Mode: Decentralized
• Brand: Xinsilu
• Emergency Time: 15 Minutes(Customizable)
• Built in Battery: Four 7ah Batteries
• Certification Certificate: ISO9001-ISO45001-ISO14001
• DC Output: 48V
• Size: 450*192*335mm
• Transport Package: Paper Box with Wooden Box
• Specification: 450*192*335MM
• Trademark: NICEA
• Origin: China
• HS Code: 3101
• Production Capacity: 1000 Pieces/Week
• Package Size: 50.00cm * 25.00cm * 35.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 3 days (1 - 10 Pieces) ; 7 days (11 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Tech nical parameters

Model		Wall-mounted type			Vertical type
		1KVA	2KVA	3KVA	1KVA	2KVA	3KVA
Capacity		1KW	2KW	3KW	1KW	2KW	3KW
Input
Voltage Range	Minimum switching voltage	At 50% load, 11OVAC +3%; at 100% load, 176VAC+3 %
	Minimum recovery voltage	Minimum switching voltage +10V
	Maximum switching voltage	300VACI3 %
	Maximum recovery voltage	Maximum switching voltage -10V
Frequency Range		40-60HZ@50HZ system/50-70HZ@60HZ system
Phase		L+ N+PE
Power Factor		100% load z0.99
Output
Output Voltage		208/220/230/240VAC
Output Voltage Accuracy		I1%
Frequency Range (synchronization range)		40-60hz@50HZsystem/50-70HZ@60HZsystem
Frequency Range (battery mode)		50hz+0.1 HZor60HZ+0.1 HZ
Overload	AC Mode	30min@102%-110%Ioad, 10min@110%-130%load 30s@130%-150%Ioad, 500ms@>150 %Ioad
	Battery Mode	10min@102%-110%Ioad, 1min@110%-130%load 10s@130%-150%Ioad, 500ms@> 150 %Ioad
Current peak ratio		3:1 (Maximum)
Harmonic distortion		2% ( linear load ) , 5%(non-linear load)
Switching time	Mains  Battery	Oms
	Inverter Bypass	0ms
Effectiveness
AC Mode		95%
Battery Mode		94.8% (20pcs batteries)
Battery
Standard	Battery Number	2 pcs	4 pcs	6 pcs	2 pcs	4 pcs	6 pcs
	Charging Current	default 1A
	Charging Voltage	13.65 x NI1 %
Long Run	Battery Number	3 pcs	6 pcs	8 pcs	3 pcs	6 pcs	8 pcs
	Charging Current	Preset: 6A110%, 1-12A optional
	Charging Voltage	13.65x N*1%
Apperance
Standard	Size Long Width High(mm)	310"438"88	380"438"88	506"438"88	284"145"213	398"145"213	450"192"335
Long Run	Size Long Width High(mm)	310"438"88	380"438"88	380"438"88	284"145"213	398"145"213	398"145"213
Environment
Operating Temperature		0-40°C
Operating Moisture		< 95%And no condensation
Operating Altitude		< 1000m""
Noise		less than 50dB@1Meter
Management
SmartRS-232		Suppon Windows@2000/2003/XP/Vista/2008. Windows@7/8, Linux. Unix and MAC
Optional SNMP		Support for power management by SNMP administrator and web browser.

Warning Code Description

Warning Code	English Meaning	Linked Active	Triggering Conditions	Recovering Conditions
1	Battery is not connected	Warning, battery discharge	Battery voltage less than 8V/PCS	Recoverab Ie(10V/PCS)
2	Low voltage in battery	Warning, battery test models return to main model	Default 11.2/pcs, Custom settings 10.5-14V/PCS(2)	Recoverable (Action point +0.2V/pcs)
3	Charging short circui	Warning, No charging to batteries	The battery voltage is lower than 5V/pcs,current is more than 4A	Unrecoverab ie
4	Mains L/N reverse connectionor the groundwire is not connected	Warning	Hardware trigger	Reco nn ect the L/ N of the ma in s powe r afte r powe r fa iIure , ch eck wheth er the gro u nd wire is con n ected , or send a co mm u n icatio n com ma n d to p ro hi b it L/N reverse conn ecti o n
8	High voltage in battery	Warning, battery discharge	Default 11.2/pcs, Custom settings +0.4V/PCS	Recoverable (DefauIt13.7V /PCS,custom settings +0.4V /pcs)
9	Chargerfa ilure	Warning	After 5 minutes of charging, the battery voltage is still less than 10V	Recoverable (battery voltage more than 10.5V)
10	Over-temperature warning	Warning, battery discharge	PFC or INV temperature sensor is higher than 80 degrees Celsius	Recoverab ie (The temperature sensor is below 75 degrees C elsius)
12	Fan failure	Warning	No fan speed signal detected	Recoverable
13	Mains disconnect	Warning	The difference between the mains voltage and the bypass voltage is greater than 100V	Recoverable
14	EEPROM failure	Warning	EEPROM read and write failed	Unrecoverable
18	Inverter output overvoltage	Warning, battery discharge	load more than 102%	Recoverable (overload less than 97%)
22	Overload lock in bypass	Warning	3 times of overload transfer to bypass mode in 30 minutes	Manual boot can be restored
23	EPO action	Warning, battery discharge		Recoverable
24	Maintenance switch action	Warning	Short circuit of CN4 terminal on control board	Recoverable

The fault code table

Fault code	English meaning	Related actions	Trigg er condition	Recovery condition
1	Busbar boost soft start failure	Turn to fault mode	When the busbar starts soft, the 30S cannot reach 380V	Unrecoverable
2	Busbar over voltage	Turn to fault mode	When the busbar is above 450V,it will lasts 5s	Unrecoverable
3	Busbar und ervoltage	Turn to fault mode	When the busbar is below 200V, it will lasts 400ms	Unrecoverable
4	DC boost failure	Turn to fault mode	DC-DC hardware protection that triggered the exception	Unrecoverable
g	Battery relay short circuit	Turn to fault mode	Battery voltage is greater than 310V and lasts for 4s	Unrecoverable
9	Busbar soft start relay failure	Turn to fault mode	The bus relay is still below SOV after 5s soft start	Unrecoverable
10	Bus bar short circuit	Turn to fault mode	During normal operation, the mother is instantaneously below 180V	Unrecoverable
17	Inverter soft StaFt failure	Turn to fault mode	After inverting soft start 40s, the rated output voltage cannot be reached, or after inverting soft 2s, the inverter voltage is still less than 20V.	Unrecoverable
18	Inverter output overvoltage	Turn to fault mode	The inverter voltage is higher than 276V and lasts 400ms	Unrecoverable
19	Inverter output undervoltage	Turn to fault mode	The inverter voltage is below 130V and lasts 400ms	Unrecoverable
20	Inverter short circuit	Turn to fault mode	The inverter voltage is less than SOV, the current is hipher than 20A, andlasts 4s	Unrecoverable
26	Negative power protection	Turn to fault mode	Inverter power is less than -2400W for 20ms, or -800W for 120ms	Unrecoverable
33	Inverter relay open	Turn to fault mode	When the inverter relay is cIosed,the difference between the inverter voltage andthe output voltage exceeds 30V for 160ms	Unrecoverable
34	Inverter rela short circuity	Turn to fault mode	When the bypass relay is cIosed,the inverter relay is disconnected and the inverter bridge is not working the difference between the inverter voltage and the bypass voltage is less than 30V	Unrecoverable
35	Bypass FBIay open	Turn to fault mode	When the bypass relay is cIosed,the difference between the bypass voltage and the output voltage exceeds 30V for 160ms	Unrecoverable
36	Bypass relay short circuit	Turn to fault mode	When the bypass relay and the inverter relay are disconnected,the difference etween the output voltage and the bypass voltage is less than 30V for 160ms	Unrecoverable
37	Input and O t Ut reversed ^'J p	Turn to fault mode	When the bypass relay and the inverter relay are disconnected,the bypass voltage is less than 20V, but the output voltage is greater than 150V	Unrecoverable
39	Charger short circuit	Turn to fault mode	The battery voltage is less than SOV and the charging current is higher than 4A	Unrecoverable
66	Overload fault	Turn to fault mode	The load exceeds the specification	Unrecoverable
67	Reverse battery	Turn to fault mode	The battery input is reversed	Unrecoverable
68	Model recognition error	Turn to fault mode	Undefined machine model	Unrecoverable
73	No bootloader	Turn to fault mode	No boot program	Unrecoverable

FAQ

Q: Are you a factory or a trading company?
A: We are a factory with a 10 year production and sales history in AC/DC power supply, uninterruptible power supply. We warmly welcome your visit.

Q: What is the delivery time?
A: Generally, the delivery time is between 7-30 days after receiving payment from the customer.
Accurate information depends on the product and quantity, and we can further communicate on this.

Q: Do you have a minimum order quantity requirement?
A: The minimum order quantity for most products is 1 set. The minimum order quantity for individual UPS is 10

Q: How long is your warranty period?
A: We provide customers with a 2-year warranty and a 1-year warranty.

Q: Can you provide customized services?
A: Yes. Since 20014, we have been involved in OEM and ODM projects.
So that we can provide professional customized services for our customers.

Q: Do you have after-sales service?
A: Yes, we have an after-sales service team.
Our after-sales engineers can provide support and guidance through video or phone when needed.

Q: Do you conduct testing after completing production?
A: Yes, our production engineer team will conduct testing upon completion of the goods, and we will provide the testing information to customers for reference before delivery.