Uninterruptible Power Supply High-Frequency UPS Dual Conversion Online UPS Power Supply 1kVA-20kVA, with PF0.9 Output and IEC/Shuko/Universal/NEMA Socket, 10kVA

• Customization: Available
• Phase: Single Phase
• Type: On-line
• Model NO.: UPS
• Protection: Unbalanced Loads
• Application: Fire Safety
• Classification: Lighting/Power
• Standby Time: Long-acting Machine
• Standby UPS: Sine Wave Output UPS
• Output Capacity: Small Type
• Equipment Mode: Decentralized
• Brand: Xinsilu
• Transport Package: Crate
• Specification: 282*145*220
• Trademark: NICEA
• Origin: China
• HS Code: 3101
• Production Capacity: 500pieces/Week

Product Description

7.Storage  and  maintenance
7-1.Storage
Please charge for 7 hours before storing this  it upright in a dry place
During storage,please perform charging maintenance according to the following  table:

Storage temperature	Charging interval	Charging time
-25°C-40°ºC	Every 3 months	1 to 2 hours
40°ºC-45°ºC	Every 2 months	1 to 2 hours

7-2.Maintenance
The UPS system uses dangerous voltage and can only be repaired by qualified   maintenance   personnel.
There  is  a  danger  of  electric  shock.Even  if  the  main  power  supply  is disconnected,the components in the  UPS system are still connected to the battery and are dangerous.
To perform any service or maintenance,you should disconnect the battery first and confirm that there is no dangerous voltage across the bus capacitor.
Only maintenance personnel who are fully familiar with batteries and have prepared protective measures can engage in or supervise battery replacement operations.Unauthorized personnel must stay away from the battery.
There is a risk of electric shock.The battery circuit is not isolated from the mains input.Dangerous voltage may appear between the battery terminal and the ground.Before touching,please make sure there is no voltage!
The battery may cause electric shock and generate short-circuit high current. Before repairing,please remove metal objects such as watches and rings,
and use tools with insulator handles and handles during repairs.
When replacing batteries,please install batteries of the same number and
specifications
Do not throw the battery into the fire,otherwise it may cause an explosion. Waste batteries should be disposed of in accordance with local regulations.
Do not disassemble or damage the battery.Once the electrolyte contained

Only replace fuses of the same type and amperage to avoid fire.
Non-professionals should not disassemble the UPS system.

6.Technical parameters

Model		6KVA	10KVA
Capacity		6000VA/5400W	10000VA/9000W
Input
Voltage Range	Minimum switching voltage	At 50%load,110VAC±3%;at 100%load,176VAC±3%
	Minimum recovery voltage	Minimum switching voltage +10V
	Maximum switching voltage	300VAC±3%
	Maximum recovery voltage	Maximum switching voltage -10V
Frequency Range		40~60HZ@50HZ    system/50~70HZ@60HZ    system
Phase		L+N+PE
Power Factor		100%load≥0.99
Output
Output Voltage		208/220/230/240VAC
Output Voltage Accuracy		±1%
Frequency Range (synchronization range)		40~60hz@50HZsystem/50~70HZ@60HZsystem
Frequency Range(battery mode)		50hz±0.1HZor60HZ±0.1HZ
Overload	AC Mode	30min@102%~110%load,10min@110%~130%load 30s@130%~150%load,500ms@>150%load
	Battery Mode	10min@102%~110%load,1min@110%~130%load 10s@130%~150%load,500ms@>150%load
Current peak ratio		3:1(Maximum)
Harmonic distortion		≤2%(linear load),≤5%(non-linear load)
Switching time	Mains(→Battery	0ms
	Inverter(-→Bypass	0ms
Effectiveness
AC Mode		95%
Battery Mode		94.8%(20pcs batteries)
Battery
Standard	Battery Number	12-16 pCS                           16 pcs
	Charging Current	default 1A
	Charging Voltage	13.65×N±1%
Long Run	Battery Number	16~20 pcS
	Charging Current	Preset:6A±10%,1-12Aoptional
	Charging Voltage	13.65×N±1%
Apperance
Standard	Size Long×Width×High(mm)	384x190×730
Long Run	Size Long×Width×High(mm)	384×190×335
Environment
Operating Temperature		0~40ºC
Operating Moisture		<95%And no condensation
Operating Altitude		<1000m**
Noise		ess than 50dB@1Meter
Management
SmartRS-232		Support Windows@2000/2003/XP/Vista/2008,Windows@7/8,Linux,Unix and MAC
Optional SNMP		Support for power management by SNMP administrator and web browser.

"When the output voltage is set to 208VAC,the output power will be reduced to 90%.
"If the  UPS  is  installed  and  used  in  an  environment  with  an  altitude  of  more  than  1000  meters,the output  power  should  be
calculated  to  decelerate  by   1%per  100  meters.
***Please  understand  that  there  will  be  no  notice  when  product  specifications  are  changed.

5-2.Warning Instruction
Warning: The UPS does  not enter the failure mode, and the LCD displays  an alarm
code
Warning Code Description

Warning Code	English Meaning	Linked Active	Triggering Conditions	Recovering Conditions
1	Battery is not connected	Warning battery discharge	Battery voltage less than 8V/PCS	Recoverable (10V/PCS)
2	Low voltage in battery	Warning, battery test models return to main model	Default 11.2/pcs, Custom settings 10.5-14V/PCS(2)	Recoverable(Action point +0.2V/pcs)
8	High voltage in battery	Warning battery discharge	Default 11.2/pcs, Custom settings +0.4V/PCS	Recoverable (Default13.7V/PCS custom settings + 0.4V/pcs)
9	Chargerfailure	Warning	After 5 minutes of charging, the battery  voltage is still less than 10V	Recoverable battery voltage  more than 10.5V)
10	Over-temperature warning	Warning, battery discharge	PFC or INV temperature sensor is higher than 80 degrees Celsius	Recoverable (The temperature  sensor is below 75 degrees Celsius)
12	Fan failure	Warning	No fan speed signal detected	Recoverable
13	Mains disconnec	Warning	The difference between the mains voltage and  the bypass voltage is  greater than 100V	Recoverable
14	EEPROM failure	Warning	EEPROM read and write failed	Unrecoverable
18	Inverter output overvoltage	Warning, battery discharge	load more than 102%	Recoverable (overload less than 97%)
23	EPO action	Warning, battery discharge		Recoverable
24	Maintenance switch action	Warning	Short circuit of CN4 terminal on control board	Recoverable

The  pictures     or  diagrams       involved     in  this    manual    are   for  reference       only  . Please      refer    to  the   actual
product    in the  end  . Specifions      are   subject    to  change    without   notice.

5.Faults and warning instructions
5.1 Description of the fault
Fault: The UPS enters Fault mode and the LCD displays the fault code.
The fault code table